/* =====================================================================
   VP — Restaurant — ONE module, seven bands.
   Everything is namespaced under .vpres so the whole page is a single
   custom module. Tokens are declared once on the root and every band
   inherits them, which is the reason this collapses to one file rather
   than five near-identical stylesheets.

   ROUND 2 CHANGES, all three from the review:
     1. the grey bands now run full-bleed (see FULL-BLEED below —
        THIS ONE NEEDS A SMALL ADDITION TO module.js)
     2. the "Perfect for any..." grid is capped to three tiles per row,
        so six tiles land 3 + 3 instead of 5 + 1
     3. the gap between the Featured On logos and the form module below
        is closed (see CLOSE BAND)
   ===================================================================== */
.vpres {
  --vpres-font:      'Montserrat', system-ui, -apple-system, 'Segoe UI', sans-serif;
  --vpres-black:     #191414;               /* brand Black */
  --vpres-green:     #81B338;               /* brand Green */
  --vpres-green-dk:  #6E9830;               /* derived — 3.39:1 on white, passes */
  --vpres-white:     #FFFFFF;
  --vpres-gray:      #F4F4F4;               /* brand Gray */

  --vpres-body:      rgba(25,20,20,.72);
  --vpres-muted:     rgba(25,20,20,.46);
  --vpres-line:      rgba(25,20,20,.11);

  --vpres-max:       1240px;
  --vpres-head:      1000px;
  --vpres-copy:      860px;
  --vpres-shot:      1000px;
  --vpres-dial:      clamp(280px, 34vw, 420px);

  color: var(--vpres-black);
  font-family: var(--vpres-font);
  -webkit-font-smoothing: antialiased;
}

.vpres__band {
  position: relative;
  isolation: isolate;
  padding: clamp(56px, 7vw, 104px) 20px;
  background: var(--vpres-white);
}
.vpres__band--hero    { overflow: hidden; }   /* the rings scale past the photo edge */
.vpres__band--gauge   { background: var(--vpres-gray); }
.vpres__band--perfect { background: var(--vpres-gray); }
/* ops used to run flush into a full-bleed photo; now it is a normal band */

/* =====================================================================
   FULL-BLEED GREY BANDS — ROUND 2
   ---------------------------------------------------------------------
   THE PROBLEM: a HubSpot module renders inside a max-width column, so a
   band asking for the page width gets the COLUMN width instead. The
   grey bands were therefore grey rectangles floating in white gutters,
   which is what the review objected to. The white bands never showed
   this because white on white has no visible edge.

   THE FIX: pull each grey band out to the viewport with negative
   inline margins. The inner .vpres__wrap already has max-width plus
   margin: 0 auto, so the CONTENT re-centres itself and this rule needs
   margins only — no padding changes.

   ---------------------------------------------------------------------
   WHY NOT calc(50% - 50vw), WHICH IS THE ANSWER YOU WILL FIND ONLINE:

   `vw` INCLUDES the scrollbar and a centred column does not. So 50vw
   overshoots by half a scrollbar on each side and produces a
   horizontal scrollbar of its own. The usual patch for that is
   overflow-x: clip on an ancestor — and on this page that ancestor
   would be .vpres itself, which is the width-constrained element. A
   clip box CANNOT be escaped by negative margins, so the band would
   widen to the viewport and then be trimmed straight back to the
   column. Net effect: nothing changes, and you spend an hour working
   out why.

   --vpres-vw IS documentElement.clientWidth, WHICH EXCLUDES THE
   SCROLLBAR, so the arithmetic is exact and nothing needs clipping.

   ============================================================
   THIS REQUIRES A SMALL ADDITION TO module.js. Without it the
   variable is undefined, the fallback of 100% makes the whole
   thing a no-op, and the bands stay column-width exactly as they
   are today. It fails safe, but it also does nothing.
   ============================================================

   .vpres__band--money already carries overflow: hidden for its particle
   canvas. That is fine here — the clip is on the band's OWN box, which
   is now the full viewport width, so there is nothing left to trim.
   ===================================================================== */
.vpres__band--gauge,
.vpres__band--perfect,
.vpres__band--money {
  margin-inline: calc(50% - var(--vpres-vw, 100%) / 2);
}

/* Two consecutive bands on the SAME background read as one continuous area, so
   a full pad on both sides of that seam stacks into a gap twice what either one
   looks like alone. Here the bands alternate white / grey / white / grey /
   white, so every seam changes colour and no halving is needed — unlike B2B,
   where Clover and Operations were both white and that seam had to be closed.
   If a band is ever recoloured, re-check its neighbours. */
.vpres__wrap { position: relative; z-index: 1; max-width: var(--vpres-max); margin: 0 auto; }

.vpres__flow { position: absolute; inset: 0; width: 100%; height: 100%; z-index: 0; pointer-events: none; }

/* ---------- reveal ----------
   Scoped per band, not to the whole module: with six bands on one root a
   single observer would fire everything at once and the five below the fold
   would have already animated by the time you reached them. */
.vpres [data-r] {
  opacity: 0; transform: translateY(20px);
  transition: opacity .8s cubic-bezier(.16,1,.3,1), transform .8s cubic-bezier(.16,1,.3,1);
  transition-delay: var(--d, 0s);
}
.vpres__band.is-in [data-r] { opacity: 1; transform: none; }

/* ---------- shared type ---------- */
.vpres__head { max-width: var(--vpres-head); margin: 0 auto; text-align: center; }
.vpres__band--gauge .vpres__head,
.vpres__band--clover .vpres__head { max-width: var(--vpres-copy); margin-bottom: clamp(30px, 3.8vw, 50px); }

.vpres__rule {
  display: block; width: 54px; height: 4px; margin: 0 auto 22px;
  background: var(--vpres-green); border-radius: 2px;
  transform: scaleX(0); transform-origin: center;
  transition: transform .7s cubic-bezier(.16,1,.3,1) .1s;
}
.vpres__rule--l { width: 46px; margin: 0 0 18px; transform-origin: left; }
.vpres__band.is-in .vpres__rule { transform: scaleX(1); }

.vpres__kicker {
  margin: 0 0 14px;
  font-size: clamp(11.5px, 1.2vw, 13px);
  font-weight: 700; letter-spacing: .18em; text-transform: uppercase;
  color: var(--vpres-green-dk);
}
/* 62px across all the industry pages, so the headline scale is identical from
   one to the next even where a short title like this one would happily take
   more. Uniformity beats squeezing an extra 12px out of one page. */
.vpres__title {
  margin: 0 0 18px;
  font-size: clamp(31px, 4.6vw, 62px);
  font-weight: 800; line-height: 1.04; letter-spacing: -.022em;
  text-wrap: balance;
}
/* kept for the pages whose headline needs a forced second line; this one's
   title is short enough that it never uses it */
.vpres__title-b { display: block; }
@media (max-width: 780px) {
  .vpres__title-b { display: inline; }
}
.vpres__h2 {
  margin: 0 0 16px;
  font-size: clamp(27px, 3.6vw, 46px);
  font-weight: 800; line-height: 1.1; letter-spacing: -.02em;
  text-wrap: balance;
}
.vpres__h3 {
  margin: 0 0 12px;
  font-size: clamp(21px, 2.5vw, 32px);
  font-weight: 800; line-height: 1.15; letter-spacing: -.018em;
  text-wrap: balance;
}
.vpres__lede {
  margin: 0;
  font-size: clamp(15.5px, 1.6vw, 18.5px);
  line-height: 1.6; max-width: 100%;
  color: var(--vpres-body); text-wrap: pretty;
}
.vpres__p {
  margin: 0 0 16px;
  font-size: clamp(15px, 1.5vw, 17px);
  line-height: 1.65;
  color: var(--vpres-body); text-wrap: pretty;
}
.vpres__p strong { color: var(--vpres-black); font-weight: 800; }
.vpres__lead {
  margin: 0 0 12px;
  font-size: clamp(19px, 2.2vw, 27px);
  font-weight: 800; line-height: 1.2; letter-spacing: -.015em;
  text-wrap: balance;
}
.vpres__sr {
  position: absolute; width: 1px; height: 1px;
  overflow: hidden; clip: rect(0 0 0 0); white-space: nowrap;
}

/* ---------- shared CTA ---------- */
.vpres__cta {
  display: inline-flex; align-items: center; gap: 10px;
  margin-top: 8px;
  padding: 16px 34px;
  border-radius: 999px;
  background: var(--vpres-black); color: var(--vpres-white);
  font-size: 15px; font-weight: 700; letter-spacing: .02em;
  text-decoration: none;
  transition: background .3s ease, transform .3s cubic-bezier(.16,1,.3,1);
}
.vpres__cta span { transition: transform .35s cubic-bezier(.16,1,.3,1); }
.vpres__cta:hover { background: var(--vpres-green-dk); transform: translateY(-2px); }
.vpres__cta:hover span { transform: translateX(4px); }
.vpres__cta:focus-visible { outline: 2px solid var(--vpres-green); outline-offset: 3px; }

.vpres__more {
  display: inline-flex; align-items: center; gap: 9px;
  font-size: 14px; font-weight: 700; letter-spacing: .04em;
  color: var(--vpres-green-dk); text-decoration: none;
}
.vpres__more span { transition: transform .35s cubic-bezier(.16,1,.3,1); }
.vpres__more:hover span { transform: translateX(4px); }
.vpres__more:focus-visible { outline: 2px solid var(--vpres-green); outline-offset: 3px; }

/* ================= 1 · HERO ================= */
/* The wrapper, not the figure, is the positioning context for the rings — the
   figure clips to its border radius, so anything inside it is invisible. */
.vpres__media {
  position: relative;
  max-width: var(--vpres-shot);
  margin: clamp(32px, 3.8vw, 56px) auto 0;
}

/* ---------- the accepted-payment rings ----------
   The same contactless motif as the Industries hero: concentric circles
   pinging outward from behind the image.

   Two things make it work over a 21:9 photo rather than a square one. The ring
   box is sized off the photo's WIDTH, so the arcs clear its sides — which is
   where they actually read. And a vertical mask fades them out before they
   reach the headline above or the props below; clipping instead of masking
   would cut an arc mid-stroke and leave a visible seam. */
.vpres__waves {
  position: absolute;
  left: 50%; top: 50%;
  width: 132%;
  aspect-ratio: 1;
  transform: translate(-50%, -50%);
  z-index: 0;
  pointer-events: none;
  overflow: visible;
  -webkit-mask-image: linear-gradient(to bottom, transparent 0%, #000 27%, #000 73%, transparent 100%);
          mask-image: linear-gradient(to bottom, transparent 0%, #000 27%, #000 73%, transparent 100%);
}
.vpres__waves circle {
  fill: none;
  stroke: var(--vpres-green);
  stroke-width: 1.5;
  /* the ring box is ~1300px wide but the viewBox is 400 — without this the
     stroke is scaled up with it and the hairline becomes a 5px band */
  vector-effect: non-scaling-stroke;
  /* required, or the circles scale from the viewBox origin, not their centre */
  transform-box: fill-box;
  transform-origin: center;
  opacity: 0;
}
.vpres__band--hero.is-in .vpres__waves circle {
  animation: vpres-ping 5.4s cubic-bezier(.2,.6,.3,1) infinite;
  animation-delay: var(--wd, 0s);
}
@keyframes vpres-ping {
  0%   { transform: scale(.42); opacity: 0; }
  14%  { opacity: .3; }
  72%  { opacity: 0; }
  100% { transform: scale(1.1); opacity: 0; }
}

.vpres__hero-shot {
  position: relative; z-index: 1;
  margin: 0;
  border-radius: clamp(14px, 1.6vw, 22px);
  overflow: hidden;
  box-shadow: 0 30px 60px rgba(25,20,20,.14);
}
.vpres__hero-shot img { transition: transform 1.1s cubic-bezier(.16,1,.3,1); }
.vpres__media:hover .vpres__hero-shot img { transform: scale(1.035); }
.vpres__hero-shot img {
  display: block; width: 100%; height: auto;
  aspect-ratio: 21 / 9;
  object-fit: cover;
  /* the handshake is the subject and sits centre-high in this frame */
  object-position: 50% 38%;
}

.vpres__props {
  display: grid; grid-template-columns: repeat(3, 1fr);
  gap: clamp(22px, 3vw, 48px);
  margin: clamp(40px, 5vw, 74px) 0 0;
  padding: 0; list-style: none;
}
.vpres__prop { margin: 0; }
.vpres__ico {
  display: grid; place-items: center;
  width: 46px; height: 46px; margin: 0 0 18px;
  border-radius: 12px; background: rgba(129,179,56,.12);
}
.vpres__ico svg {
  width: 24px; height: 24px;
  fill: none; stroke: var(--vpres-green-dk);
  stroke-width: 1.8; stroke-linecap: round; stroke-linejoin: round;
}
.vpres__prop-h {
  margin: 0 0 10px;
  font-size: clamp(16.5px, 1.8vw, 20px);
  font-weight: 800; line-height: 1.25; letter-spacing: -.01em;
  text-wrap: balance;
}
.vpres__prop-p {
  margin: 0;
  font-size: clamp(14.5px, 1.45vw, 16px);
  line-height: 1.62;
  color: var(--vpres-body); text-wrap: pretty;
}
/* a short rule that draws itself in above each prop, staggered with the
   reveal — enough structure to stop the three reading as loose paragraphs */
.vpres__tick {
  display: block; width: 28px; height: 3px;
  margin: 0 0 20px;
  background: var(--vpres-green); border-radius: 2px;
  transform: scaleX(0); transform-origin: left;
  transition: transform .6s cubic-bezier(.16,1,.3,1) var(--d, 0s);
}
.vpres__prop { transition: transform .45s cubic-bezier(.16,1,.3,1); }
.vpres__prop:hover { transform: translateY(-4px); }
.vpres__ico { transition: background .4s ease; }
.vpres__ico svg { transition: transform .5s cubic-bezier(.16,1,.3,1); }
.vpres__prop:hover .vpres__ico { background: rgba(129,179,56,.22); }
.vpres__prop:hover .vpres__ico svg { transform: scale(1.12); }
.vpres__band--hero.is-in .vpres__tick { transform: scaleX(1); }

/* ================= 2 · GAUGE ================= */
.vpres__gauge-grid {
  display: grid; grid-template-columns: auto 1fr;
  align-items: center; gap: clamp(30px, 5vw, 76px);
}
.vpres__stage { display: grid; place-items: center; }
.vpres__dial {
  position: relative;
  width: var(--vpres-dial); height: var(--vpres-dial);
  cursor: pointer; border-radius: 50%;
}
.vpres__dial:focus-visible { outline: 2px solid var(--vpres-green); outline-offset: 8px; }
.vpres__canvas { display: block; width: 100%; height: 100%; }

/* Real text over the canvas, never painted into it — canvas type is invisible
   to screen readers, blurs on high-DPI and cannot inherit Montserrat. It is
   also why the count-up reads its final value out of the markup. */
.vpres__read {
  position: absolute; inset: 0;
  display: grid; align-content: center; justify-items: center;
  pointer-events: none; text-align: center; padding: 0 13%;
}
.vpres__val { margin: 0; display: flex; align-items: flex-start; line-height: 1; }
.vpres__num {
  /* Sized for the RESTING string "10–100", not for "100". The count-up and the
     final range therefore share one size and nothing jumps at the end. Going
     bigger overflows the dial the moment the range appears. */
  font-size: clamp(30px, 5.4vw, 60px);
  font-weight: 800; letter-spacing: -.04em;
  /* tabular figures — without them the number jitters sideways as it counts */
  font-variant-numeric: tabular-nums;
  font-feature-settings: 'tnum' 1;
  color: var(--vpres-black);
  white-space: nowrap;
}
/* a short fade as the counter hands off to the range, so it does not just pop */
.vpres__num.is-range { animation: vpres-swap .45s ease both; }
@keyframes vpres-swap { from { opacity: .2; } to { opacity: 1; } }
.vpres__sym {
  margin-top: .14em;
  font-size: clamp(17px, 2.6vw, 32px);
  font-weight: 800; letter-spacing: -.02em;
  color: var(--vpres-green-dk);
}
.vpres__cap {
  margin: 10px 0 0;
  font-size: clamp(10.5px, 1.1vw, 12px);
  font-weight: 700; letter-spacing: .14em; text-transform: uppercase;
  line-height: 1.4; color: var(--vpres-muted);
}
.vpres__end {
  position: absolute; bottom: 4%;
  font-size: clamp(10px, 1.05vw, 11.5px);
  font-weight: 700; letter-spacing: .1em;
  color: var(--vpres-muted);
}
.vpres__end--a { left: 4%; }
.vpres__end--b { right: 4%; color: var(--vpres-green-dk); }

/* ================= 3 · CLOVER ================= */
/* Divs, not <button> — HubSpot themes repaint bare buttons and win on
   specificity. Enter/Space/arrows/Home/End are wired by hand in the JS. */
.vpres__tabs {
  display: flex; flex-wrap: wrap; justify-content: center;
  gap: 8px; margin: 0 0 clamp(30px, 3.6vw, 46px);
}
.vpres__tab {
  padding: 12px 22px;
  border-radius: 999px; border: 1px solid var(--vpres-line);
  cursor: pointer;
  font-size: clamp(12px, 1.25vw, 13.5px);
  font-weight: 700; letter-spacing: .08em; text-transform: uppercase;
  white-space: nowrap; color: var(--vpres-muted);
  transition: color .3s ease, border-color .3s ease, background .3s ease, transform .3s cubic-bezier(.16,1,.3,1);
}
.vpres__tab:hover { color: var(--vpres-black); border-color: rgba(25,20,20,.24); transform: translateY(-2px); }
.vpres__tab.is-active { color: var(--vpres-green-dk); border-color: var(--vpres-green); background: rgba(129,179,56,.10); }
.vpres__tab:focus-visible { outline: 2px solid var(--vpres-green); outline-offset: 3px; }

.vpres__panel {
  display: grid; grid-template-columns: 1.05fr .95fr;
  align-items: center; gap: clamp(26px, 4vw, 62px);
}
.vpres__panel[hidden] { display: none; }
.vpres__panel.is-on { animation: vpres-in .6s cubic-bezier(.16,1,.3,1) both; }
@keyframes vpres-in { from { opacity: 0; transform: translateY(14px); } to { opacity: 1; transform: none; } }

.vpres__fig { margin: 0; }
/* Each image keeps its own aspect ratio and is capped by HEIGHT. A fixed box
   with object-fit: cover would crop the dashboards into unreadable slivers,
   and height-capping is also why the panel does not jump when you switch tabs. */
/* No plate, no card. These are product renders and UI composites on
   transparent grounds — sitting them on a grey rounded rectangle with a box
   shadow framed every one of them as a card, which is the dated look. A
   drop-shadow follows the actual silhouette of the artwork instead of boxing
   it, so a handheld reads as a handheld and a monitor composite reads as
   hardware rather than a screenshot in a frame. */
.vpres__shot {
  display: block; width: 100%; height: auto;
  max-height: clamp(240px, 30vw, 380px);
  object-fit: contain;
  /* Rounded on the image itself, not on a wrapper — a wrapper would be a plate
     again. On the transparent device cut-outs this is invisible, since there
     are no corners to round; on the photographs it is the whole point. */
  border-radius: clamp(12px, 1.4vw, 18px);
  filter: drop-shadow(0 22px 38px rgba(25,20,20,.16));
}
/* Not every asset here is a transparent cut-out. Some are opaque white WEBP /
   PNG exports, and a drop-shadow on an opaque rectangle traces the RECTANGLE —
   which puts the card straight back, just softer. Those get no shadow at all:
   on a white band the block edge vanishes and only the devices inside it read.
   Rule of thumb when swapping an image — if it still shows a faint rectangle,
   add --flat; if it looks like a sticker with no depth, take --flat off. */
.vpres__shot--flat { filter: none; }
/* the Clover Go is 330px at source; upscaling it shows every pixel */
.vpres__shot--small { max-width: 330px; margin: 0 auto; }
.vpres__copy { min-width: 0; }

.vpres__list { margin: 0 0 4px; padding: 0; list-style: none; }
.vpres__list li {
  position: relative; padding: 7px 0 7px 26px;
  font-size: clamp(14.5px, 1.45vw, 16px); font-weight: 600;
  border-bottom: 1px solid var(--vpres-line);
}
.vpres__list li:last-child { border-bottom: 0; }
.vpres__list li::before {
  content: ''; position: absolute; left: 2px; top: 50%;
  width: 7px; height: 7px; margin-top: -3.5px;
  border-radius: 50%; background: var(--vpres-green);
}



/* ================= 4 · PERFECT FOR ANY =================
   Six inline SVG icons replacing the kisspng clipart PNGs the live page used —
   no image weight, sharp at any size, and no question about provenance. */
.vpres { --vpres-tile: clamp(140px, 15vw, 186px); }

/* A wrapping flex row rather than a grid, and centred. Card counts differ per
   page — six here, three on eCommerce — and flex needs no change at all
   because justify-content: center handles any count and centres the last row.
   A grid would need its column count rewritten per page.

   =====================================================================
   ROUND 2 — THE CONTAINER IS NOW CAPPED AT THREE TILES.

   Six tiles at full width came to about 1216px against a 1240px wrap,
   so on a wide screen they just fitted on one line — and at any width
   between roughly 1000 and 1230 they wrapped 5 + 1, stranding a single
   tile on its own row. That is the orphan the review flagged.

   Capping the CONTAINER rather than setting a column count keeps the
   flex behaviour the comment above describes: it still centres any
   number of tiles and still centres a short last row. Six now land
   3 + 3 at every width above the 560px breakpoint, where the tile
   token switches to 50% and they go 2 + 2 + 2.

   The cap is computed from the tile token and the gap, so if either is
   changed the three-up holds without touching this line. If a page
   ever wants four across, change the 3 to a 4 and the 2 to a 3 (the
   gap count is always one less than the tile count).
   ===================================================================== */
.vpres__grid {
  display: flex; flex-wrap: wrap; justify-content: center;
  gap: clamp(12px, 1.6vw, 20px);
  max-width: calc(var(--vpres-tile) * 3 + clamp(12px, 1.6vw, 20px) * 2);
  margin: 0 auto; padding: 0; list-style: none;
}
.vpres__item {
  flex: 0 0 auto;
  width: var(--vpres-tile);
  display: flex; flex-direction: column; align-items: center;
  gap: 16px;
  padding: clamp(22px, 2.4vw, 30px) 14px;
  background: var(--vpres-white);
  border-radius: 16px;
  transition: transform .45s cubic-bezier(.16,1,.3,1), box-shadow .45s ease;
}
.vpres__item:hover { transform: translateY(-6px); box-shadow: 0 18px 36px rgba(25,20,20,.10); }

.vpres__item-ico {
  display: grid; place-items: center;
  width: 56px; height: 56px;
  border-radius: 14px;
  background: rgba(129,179,56,.12);
  transition: background .45s ease;
}
.vpres__item-ico svg {
  width: 30px; height: 30px;
  fill: none; stroke: var(--vpres-green-dk);
  stroke-width: 1.7; stroke-linecap: round; stroke-linejoin: round;
  transition: transform .5s cubic-bezier(.16,1,.3,1);
}
.vpres__item:hover .vpres__item-ico { background: rgba(129,179,56,.2); }
.vpres__item:hover .vpres__item-ico svg { transform: scale(1.1); }

.vpres__item-name {
  font-size: clamp(12.5px, 1.3vw, 14px);
  font-weight: 700; line-height: 1.35;
  text-align: center; text-wrap: balance;
}
.vpres__many {
  margin: clamp(26px, 3vw, 40px) 0 0;
  text-align: center;
  font-size: clamp(15px, 1.5vw, 17px);
  font-weight: 700;
  color: var(--vpres-muted);
}

/* ================= 5 · OPERATIONS ================= */
/* ================= 6 · MONEY BAND is below OPERATIONS ================= */
.vpres__row {
  display: grid; grid-template-columns: 1fr 1fr;
  align-items: center; gap: clamp(26px, 4.5vw, 72px);
  margin: 0 0 clamp(44px, 5.5vw, 84px);
}
/* the second row reads image-right so the eye zig-zags down the page rather
   than running down a single column of pictures */
.vpres__row--flip .vpres__fig { order: 2; }

/* ---------- the money band ----------
   The card and the shape stage share the row evenly, so the particles have a
   lane of their own instead of being squeezed around the copy.

   The bleed rule near the top of this file also applies to this band. Its
   overflow: hidden stays — the clip is on the band's own box, which is now
   viewport-width, so it only ever catches particles leaving the screen. */
.vpres__band--money { background: var(--vpres-gray); overflow: hidden; }

.vpres__money-grid {
  display: grid;
  grid-template-columns: 1fr auto;
  align-items: center;
  gap: clamp(30px, 5vw, 76px);
}

.vpres__money-card {
  position: relative;
  z-index: 1;
  padding: clamp(34px, 4.4vw, 58px) clamp(28px, 3.6vw, 52px);
  border-radius: clamp(16px, 1.8vw, 24px);
  background: var(--vpres-black);
  box-shadow: 0 30px 60px rgba(25,20,20,.18);
}
/* Colours declared, never inherited, and doubled on .vpres for weight — HubSpot
   themes carry their own heading and paragraph colour rules that beat an
   inherited value, which is how white type on a dark card ends up repainted. */
.vpres .vpres__money-h {
  margin: 0 0 14px;
  font-size: clamp(26px, 3.2vw, 42px);
  font-weight: 800; line-height: 1.08; letter-spacing: -.022em;
  color: var(--vpres-white);
  text-wrap: balance;
}
.vpres .vpres__money-b { display: block; color: var(--vpres-green); }
.vpres .vpres__money-p {
  margin: 0;
  font-size: clamp(15px, 1.6vw, 17.5px);
  line-height: 1.65;
  color: rgba(255,255,255,.82);
  text-wrap: pretty;
}
.vpres .vpres__money-p a {
  color: var(--vpres-white); font-weight: 700;
  text-decoration: underline; text-underline-offset: 3px;
  text-decoration-color: var(--vpres-green); text-decoration-thickness: 2px;
}
.vpres .vpres__money-p a:hover { color: var(--vpres-green); }
.vpres .vpres__money-p a:focus-visible { outline: 2px solid var(--vpres-green); outline-offset: 3px; }

/* the shape stage */
.vpres__morph { display: grid; place-items: center; }
.vpres__morph-cv {
  display: block;
  width: clamp(280px, 32vw, 400px);
  height: clamp(280px, 32vw, 400px);
}

/* measured, never painted */
.vpres__glyph { position: absolute; width: 0; height: 0; overflow: hidden; pointer-events: none; }

/* ================= 7 · CLOSE ================= */
/* =====================================================================
   ROUND 2 — THE GAP TO THE FORM MODULE IS CLOSED.

   The review flagged too much white between the Featured On logos and
   the form. That gap is made of two things stacked, and only one of
   them belongs to this module:

     · this band's own padding-bottom, clamp(56px, 7vw, 104px)
     · whatever top spacing the separate form module carries

   Cutting the band's bottom padding is the cleaner of the two levers:
   it lives in this file, it needs no coordination with the form
   module, and it cannot affect any other page that uses that form.

   The band's TOP padding is untouched — that is the gap under the
   money band above, and it is doing real work.

   If it is still too open after this, the remainder is the form
   module's own spacing and has to be dealt with there.
   ===================================================================== */
.vpres__band--close {
  text-align: center;
  padding-bottom: clamp(24px, 3vw, 40px);
}
.vpres__close-card {
  max-width: 780px;
  margin: clamp(34px, 4vw, 54px) auto 0;
  padding: clamp(30px, 3.6vw, 46px) clamp(22px, 3vw, 44px);
  background: var(--vpres-gray);
  border-radius: clamp(16px, 1.8vw, 24px);
}
.vpres__kick {
  margin: 0 0 10px;
  font-size: clamp(19px, 2.2vw, 27px);
  font-weight: 800; line-height: 1.2; letter-spacing: -.015em;
  text-wrap: balance;
}
.vpres__note {
  margin: 0 0 24px;
  font-size: clamp(14.5px, 1.45vw, 16px);
  color: var(--vpres-body);
}
.vpres__tp {
  display: block; margin: 18px auto 0;
  font-size: 13px; font-weight: 700; letter-spacing: .04em;
  color: var(--vpres-green-dk); text-decoration: none;
}
.vpres__tp span { display: inline-block; transition: transform .35s cubic-bezier(.16,1,.3,1); }
.vpres__tp:hover span { transform: translateX(4px); }
.vpres__tp:focus-visible { outline: 2px solid var(--vpres-green); outline-offset: 3px; }

/* the logo strip's own top margin is trimmed too. At the old value the
   Featured On block sat almost as far from the close card as the close
   card did from the money band, which made the page look like it had
   two endings. */
.vpres__featured { margin: clamp(34px, 4.2vw, 60px) 0 0; }
.vpres__featured-h {
  margin: 0 0 clamp(22px, 2.6vw, 34px);
  font-size: clamp(11.5px, 1.2vw, 13px);
  font-weight: 700; letter-spacing: .18em; text-transform: uppercase;
  color: var(--vpres-muted);
}
/* wrapping flex, centred — nine logos land 9 / 5 / 3 / 2 and the last row
   always centres itself, which a grid will not do without nth-child hacks */
.vpres__logos {
  display: flex; flex-wrap: wrap;
  justify-content: center; align-items: center;
  gap: clamp(20px, 3.2vw, 52px);
  margin: 0; padding: 0; list-style: none;
}
.vpres__logos li { flex: 0 0 auto; }
/* Sized by HEIGHT, not width. These are a square badge, a wordmark and a long
   masthead among others — width sizing makes the square one enormous and the
   masthead a sliver. Greyed back so nine third-party marks do not out-shout
   the page or clash with brand green. */
.vpres__logos img {
  display: block;
  height: clamp(20px, 2.4vw, 30px);
  width: auto; max-width: 150px;
  object-fit: contain;
  filter: grayscale(1); opacity: .55;
  transition: opacity .35s ease, filter .35s ease;
}
.vpres__logos li:hover img { filter: grayscale(0); opacity: 1; }

/* the anchor the form module sits on — offset so a #Form jump does not land
   with the first field tucked under a sticky header */
.vpres-form-anchor { scroll-margin-top: 90px; }

/* ================= breakpoints ================= */
@media (max-width: 900px) {
  .vpres__props { grid-template-columns: 1fr 1fr; gap: 30px 26px; }
  /* three into two columns leaves an orphan — it centres across the full row
     rather than sitting alone on the left */
  .vpres__prop:last-child { grid-column: 1 / -1; max-width: 460px; }
  .vpres__hero-shot img { aspect-ratio: 16 / 9; }

  .vpres__gauge-grid { grid-template-columns: 1fr; gap: 34px; }
  .vpres { --vpres-dial: min(360px, 78vw); }
  .vpres__gauge-copy { display: flex; flex-direction: column; align-items: center; text-align: center; }

  .vpres__panel { grid-template-columns: 1fr; gap: 26px; }
  .vpres__shot { max-height: 300px; }
  .vpres__panel .vpres__copy { text-align: center; }
  .vpres__list { display: inline-block; text-align: left; }
}
@media (max-width: 860px) {
  .vpres__row { grid-template-columns: 1fr; gap: 24px; }
  /* the card goes full width and the glyphs move to the band's lower half,
     which the JS handles by measuring the viewport rather than by media query */
  .vpres__money-grid { grid-template-columns: 1fr; gap: 34px; }
  .vpres__money-card { text-align: center; }
  /* order is cleared or the flipped row puts its picture below its copy on a
     phone, which breaks the read order for everyone */
  .vpres__row--flip .vpres__fig { order: 0; }
}
@media (max-width: 600px) {
  .vpres__props { grid-template-columns: 1fr; }
  .vpres__prop:last-child { grid-column: auto; max-width: none; }
  .vpres__hero-shot img { aspect-ratio: 4 / 3; }
}
@media (max-width: 560px) {
  .vpres { --vpres-tile: calc(50% - 6px); }
  /* the three-tile cap comes off here: the token is now a percentage of the
     container, so a cap computed from it would collapse the grid to nothing */
  .vpres__grid { gap: 12px; max-width: none; }
  .vpres__item { padding: 20px 10px; gap: 12px; }
  .vpres__item-ico { width: 48px; height: 48px; }
  .vpres__item-ico svg { width: 26px; height: 26px; }
  .vpres__tabs { gap: 6px; }
  .vpres__tab { padding: 10px 15px; font-size: 11px; letter-spacing: .05em; }
  .vpres__cta { width: 100%; justify-content: center; }
  .vpres__logos { gap: 18px 24px; }
}

@media (prefers-reduced-motion: reduce) {
  .vpres [data-r] { opacity: 1 !important; transform: none !important; transition: none !important; }
  .vpres .vpres__rule { transform: scaleX(1) !important; transition: none !important; }
  .vpres .vpres__tick { transform: scaleX(1) !important; transition: none !important; }
  .vpres__waves circle { animation: none !important; opacity: 0 !important; }
  .vpres__prop, .vpres__ico, .vpres__ico svg, .vpres__hero-shot img { transition: none !important; }
  .vpres__prop:hover { transform: none; }
  .vpres__item, .vpres__item-ico, .vpres__item-ico svg { transition: none !important; }
  .vpres__item:hover { transform: none; }
  .vpres__panel.is-on { animation: none !important; }
  .vpres__cta, .vpres__tab, .vpres__more span, .vpres__tp span, .vpres__logos img { transition: none !important; }
  /* the JS paints the gauge once at its final value and does not count up */
}
/* =====================================================================
   ===== RESTAURANT — ALL FOUR LINK TYPES, LINK STATES =====
   ===== PASTE THIS AT THE VERY END OF module.css. ONCE. =====

   IF YOU EVER SEE THIS BANNER TWICE IN THE FILE, DELETE THE EXTRA
   COPIES. Nothing above it changes. No !important — specificity alone
   is enough, and the only !important in this file belongs to the
   reduced-motion block.

   FOUR LINK TYPES HERE, NOT ONE. The other product pages had one or
   two pill buttons; this page also has two TEXT links beside the
   Clover panels and at the close, plus the link inside the dark money
   card.

   >>> THIS FILE IS GENERATED FROM THE AUTOMOTIVE BLOCK. Automotive,
   >>> B2B, Restaurant and Retail are the same module architecture with
   >>> different prefixes, so these rules are identical apart from the
   >>> token names and the dark-surface selector. If one is ever
   >>> changed, change all four or they will drift.

     1  .vpres__cta         pill, ink -> green        TWO groups
     2  .vpres__more        text link, green          one group
     3  .vpres__tp          text link, green          one group
     4  .vpres__money-p a   text link on a photo      TWO groups

   ---------------------------------------------------------------------
   WHY ALL FOUR BROKE THE SAME WAY

   Each declares `color` exactly once, at specificity 0-1-0. The theme's
   `a:visited` and `a:hover` are 0-1-1 — one class plus one element —
   and 0-1-1 beats 0-1-0 regardless of source order. So every state
   except the resting one came from the theme, which also supplies the
   underline.

   The selectors below are `.vpres a.vpres__x:state`, which is 0-3-1.

   >>> THE TEXT LINKS ARE WORSE THAN THE BUTTONS, not better. A pill
   >>> still reads as a button when its label goes blue. A bare text
   >>> link that goes blue and underlined simply looks like it belongs
   >>> to a different website.
   ===================================================================== */

/* =====================================================================
   1 · .vpres__cta  —  THE PILL.  TWO GROUPS.

   Ink pill with a white label at rest; the pill turns #6E9830 on hover.

   >>> THIS ALSO FIXES A CONTRAST FAILURE THAT WAS ALREADY THERE. <<<

       white on #6E9830 ... 3.39:1   FAIL
       ink   on #6E9830 ... 5.10:1   PASS

   15px at weight 700 is NOT "large text" under WCAG — that starts at
   18.5px bold — so the bar is 4.5:1 and white misses it. This is the
   fourth page in a row carrying the same bug, hidden each time by the
   theme painting the hover label blue.

   THE HOVER GROUP MUST COME SECOND. At equal specificity the later
   rule wins, which is what lets hover override the resting colour.
   ===================================================================== */
.vpres a.vpres__cta,
.vpres a.vpres__cta:link,
.vpres a.vpres__cta:visited,
.vpres a.vpres__cta:focus {
  color: var(--vpres-white);
  text-decoration: none;
}

.vpres a.vpres__cta:hover,
.vpres a.vpres__cta:active,
.vpres a.vpres__cta:visited:hover,
.vpres a.vpres__cta:visited:active {
  color: var(--vpres-black);
  text-decoration: none;
}

/* =====================================================================
   2 · .vpres__more  AND  3 · .vpres__tp  —  THE TEXT LINKS.  ONE GROUP.

   "Explore Clover", "See the TCD App", and the closing "talk to"
   link. No pill, no background — the colour IS the styling, which is
   why losing it to the theme is so visible.

   Both keep their existing green. No underline in any state: these
   already carry a trailing arrow that marks them as links, and the
   arrow is what moves on hover.

   ---------------------------------------------------------------------
   >>> FLAGGING, NOT FIXING: THIS GREEN FAILS CONTRAST AT THIS SIZE. <<<

   The comment at the top of this file calls #6E9830 "3.39:1 on white,
   passes" — and it does, but only as LARGE text, which starts at
   18.5px bold. These two links are 14px and 13px at weight 700, so the
   bar is 4.5:1 and 3.39:1 misses it.

   I HAVE NOT CHANGED IT, because it is the resting colour of a visible
   link across every industry page and that is a design decision rather
   than a bug fix. The one-line change if you want it:

       color: #557625;     /* 5.23:1 on white — passes at body size */
                           /* already defined as --va-green-tx in the
                              About module for exactly this reason */

   Swap it in both rules below and nothing else needs to move.
   ===================================================================== */
.vpres a.vpres__more,
.vpres a.vpres__more:link,
.vpres a.vpres__more:visited,
.vpres a.vpres__more:hover,
.vpres a.vpres__more:focus,
.vpres a.vpres__more:active,
.vpres a.vpres__more:visited:hover,
.vpres a.vpres__more:visited:active,
.vpres a.vpres__tp,
.vpres a.vpres__tp:link,
.vpres a.vpres__tp:visited,
.vpres a.vpres__tp:hover,
.vpres a.vpres__tp:focus,
.vpres a.vpres__tp:active,
.vpres a.vpres__tp:visited:hover,
.vpres a.vpres__tp:visited:active {
  color: var(--vpres-green-dk);
  text-decoration: none;
}

/* =====================================================================
   4 · .vpres__money-p a  —  THE LINK ON THE DARK CARD.  TWO GROUPS.

   White with a green underline at rest, green on hover. Both are
   already declared in this file; what was missing is :visited, so the
   theme's blue appeared on the ink money card — the worst place on the
   page for it.

   Both colours clear the bar on ink comfortably:
       white   on #191414 ... 17.4:1   PASS
       #81B338 on #191414 ...  6.6:1   PASS
   Note the inversion: brand green FAILS on white at 2.49:1, which is
   why every other green on this page is #6E9830. On ink it is the
   other way round and the brighter green is correct. Do not
   "harmonise" this one with the rest of the file.

   >>> THE UNDERLINE STAYS HERE, unlike the two text links above. This
   >>> one sits inside a paragraph with no arrow beside it, so the
   >>> underline is the only thing marking it as a link. Removing it
   >>> would leave a colour change as the sole affordance, which fails
   >>> for anyone who cannot distinguish it.

   The decoration properties are restated because `text-decoration` is
   a shorthand: declaring it alone would reset the colour and thickness
   set higher up in this file.
   ===================================================================== */
.vpres .vpres__money-p a,
.vpres .vpres__money-p a:link,
.vpres .vpres__money-p a:visited,
.vpres .vpres__money-p a:focus {
  color: var(--vpres-white);
  text-decoration: underline;
  text-underline-offset: 3px;
  text-decoration-color: var(--vpres-green);
  text-decoration-thickness: 2px;
}

.vpres .vpres__money-p a:hover,
.vpres .vpres__money-p a:active,
.vpres .vpres__money-p a:visited:hover,
.vpres .vpres__money-p a:visited:active {
  color: var(--vpres-green);
  text-decoration: underline;
  text-underline-offset: 3px;
  text-decoration-color: var(--vpres-green);
  text-decoration-thickness: 2px;
}

/* =====================================================================
   5 · THE FOCUS RINGS

   All four already declare green :focus-visible rings higher up in this
   file and those stay. This only drops the ring after a MOUSE click
   while keeping it for keyboard users.
   ===================================================================== */
.vpres a.vpres__cta:focus:not(:focus-visible),
.vpres a.vpres__more:focus:not(:focus-visible),
.vpres a.vpres__tp:focus:not(:focus-visible),
.vpres .vpres__money-p a:focus:not(:focus-visible) {
  outline: none;
}

/* The arrows are child spans and inherit currentColor, so they travel
   with the rules above. Stated anyway: an icon that set its own fill or
   stroke would not. */
.vpres a.vpres__cta span,
.vpres a.vpres__more span,
.vpres a.vpres__tp span { color: inherit; }